What's inside
As an Amazon Associate I earn from qualifying purchases. This post may contain affiliate links at no extra cost to you.
When a Craftsman pressure washer starts leaking, loses pressure, or refuses to prime, the fix is almost always a single component rather than a whole new machine. The hard part is knowing which part matches your model without paying for a part that does not fit or a generic piece that fails within a season. Replacement pressure washer hoses, pump heads, outlet tubes, nozzles, and guns all wear at different rates, and selecting the wrong one wastes time and money on a weekend you could have spent actually cleaning.
What separates a worthwhile replacement from a cheap disappointment comes down to three things: confirmed compatibility with your pump series, pressure and flow ratings that match or exceed the original component, and build quality that survives repeated connection cycles. Owner reviews consistently flag parts that crack at the crimp, strips threads after two uses, or quietly drop output below what the engine can deliver. This roundup compares Craftsman pressure washer parts across published specs, listed prices, and aggregated owner feedback to help you match the right component to the right problem.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Product prices and availability are accurate as of the date shown and are subject to change.
Quick Picks
| Product | Best for | Price |
|---|---|---|
| B & S Craftsman & Generac Replacement Hose | Made-in-USA hose replacement | $28.99 |
| Outlet Tube Replacement 190589GS | Internal pump reassembly | $14.69 |
| Pump Head Assy 92841730/92840020 | Full pump head swap at 2800 PSI | $118 |
| YAMATIC Gun with Extension Wand | Reach and nozzle variety | $40.49 |
| Soap Nozzle Tips 5-Pack | Detergent application on a budget | $6.99 |
| Hourleey Tips with Holder | Organized multi-angle nozzle set | $8.99 |
| Hourleey 7/8″ Shaft Vertical Pump | Engine-matched pump upgrade | $59.83 |
| YAMATIC 25 FT Hose M22-14mm | Long-reach hose on a tight budget | $22.99 |
How We Picked
We narrowed this list using four criteria: confirmed model or part-number compatibility with Craftsman and Briggs & Stratton pump series, pressure rating that meets or exceeds OEM specifications, real-world durability signals drawn from owner reviews (leak points, thread wear, connector fatigue), and price-to-useful-life ratio relative to comparable parts in the same category.
The 8 Best Craftsman Pressure Washer Parts in 2026
B & S Craftsman & Generac Replacement Pressure Washer Hose — Made in USA
For owners of Craftsman or Generac units whose factory hose has split at the crimp or developed a soft spot near the coupling, this replacement from Briggs & Stratton is the most straightforward OEM-style option. Pro: domestically manufactured with the same fitting geometry as the original, so no adapters are needed. Pro: owners report a noticeable improvement in kink resistance over the stock hose that came with older electric Craftsman models. Con: the price is higher than many third-party alternatives that offer comparable length. Skip this if your machine uses a non-standard quick-connect end rather than the traditional threaded fitting, or if you need more than the standard hose length for large driveways.
Outlet Tube Replacement 190589GS Compatible with Briggs & Stratton & Troy-Bilt
The outlet tube is one of the first internal components to crack on Craftsman pumps that sit idle between seasons. This part covers several pump series under Briggs & Stratton numbering. Pro: low cost means you can replace it proactively during a pump rebuild without straining the budget. Pro: confirmed fit across multiple model numbers, reducing the guesswork when your unit’s plate is faded. Con: it is only useful if the rest of the pump internals are healthy; a worn cam or cracked manifold will still cause failure. Skip this if your symptom is external leaking at the manifold bolts rather than a cracked tube inside the discharge port.
Replacement Pressure Washer Pump Head Assembly 92841730/92840020 — 2800 PSI
When the pump head is beyond individual component repair, this assembly restores a Craftsman 580.752501 or equivalent Briggs & Stratton 126T02 to factory output. Pro: rated for 2800 PSI, matching the upper range of residential Craftsman gas models. Pro: sold as a complete head with valves, springs, and seals already assembled, so a DIY mechanic needs only a socket and a few minutes. Con: at $118 it represents the single largest parts expenditure on this list, and some owners note the included seals are adequate but not premium-grade. Skip this if your engine is the problem; a head assembly cannot compensate for low RPM or a damaged crankshaft seal.
YAMATIC Pressure Washer Gun with Extension Wand, 4000 PSI, 5 Nozzle
This gun-and-wand set is designed for users who want greater reach without buying a separate telescoping lance. Pro: rated at 4000 PSI, comfortably above what most Craftsman residential pumps produce, so the gun itself will not be the limiting factor. Pro: five included nozzle tips cover the full fan-angle range from 0 to 65 degrees, eliminating a separate tips purchase. Con: the plastic trigger housing is a common owner complaint under extended use; heavier guns with metal frames last longer but cost significantly more. Skip this if your workload involves chemical injection or low-pressure detergent only; a simpler foam cannon setup would serve better.
Pressure Washer Soap Nozzle Tips 5-Pack, 1/4 Quick Connect, Up to 4500 PSI
These are dedicated soap-application tips, not general-purpose cleaning nozzles. Pro: rated up to 4500 PSI and 2.5 GPM, so they handle the pressure range of virtually any Craftsman unit in the lineup. Pro: the 1/4-inch quick-connect design means swapping between soap and rinse takes seconds without tools. Con: owners note the internal orifice can clog if detergent is mixed too thickly, requiring periodic flushing with clean water. Skip this if your machine uses a threaded coupler rather than 1/4-inch quick connect, or if your detergent system is a downstream injector that does not rely on a dedicated low-pressure tip.
Hourleey Pressure Washer Tips with Holder, 7 Nozzle Tips, 1/4 Inch Quick Connect, 4000 PSI
A step up in variety from the five-pack, this set adds two extra angles and a plastic holder that mounts near the hose connection point. Pro: the holder keeps tips organized at the machine rather than loose in a bucket, a small convenience that owners appreciate over time. Pro: seven distinct angles from red to white cover every residential surface from concrete to painted siding. Con: the included holder is lightweight plastic and can snap if yanked; metal alternatives exist but cost more. Skip this if you already own a compatible tip set; the added value here is organizational, not functional.
Hourleey 7/8″ Shaft Vertical Pressure Washer Pump, 3000 PSI 2.5 GPM
For Craftsman units whose original pump has seized or lost significant pressure beyond what a head assembly repair can restore, this complete replacement pump fits engines with a 7/8-inch vertical shaft. Pro: rated 3000 PSI at 2.5 GPM, exceeding many OEM pump outputs and offering a modest upgrade path. Pro: compatible across Brute, Craftsman, and Homelite engines sharing that shaft dimension. Con: it requires a matching engine; if your shaft is horizontal or a different diameter, this pump will not bolt on. Skip this if your engine is small or aging; pairing a higher-output pump with a struggling motor creates more heat than pressure.
YAMATIC Pressure Washer Hose 25 FT 1/4″, M22-14mm Female
The most affordable long-reach option here, this 25-foot hose fits any pump or gun with M22-14mm female connections. Pro: the length covers most residential driveways and siding without requiring a second hose or extension. Pro: the 1/4-inch bore keeps pressure drop minimal at the flow rates Craftsman pumps typically produce. Con: M22 threading is not universal across all Craftsman models; owners of older units with proprietary couplings will need an adapter. Skip this if your machine uses quick-connect fittings exclusively, as the mismatch will cost you the savings on the hose itself.
Buying Guide
Match the Shaft and Fitting to Your Existing Pump
The single most common cause of a wasted parts order is assuming thread size or shaft diameter without measuring. Craftsman gas units use several pump series with different connection standards: M22 male, 3/8-inch quick connect, and older proprietary tapered fittings all appear in the field. Before ordering a hose or gun, identify your coupling type. For pumps, the shaft must match in both diameter and orientation; a 7/8-inch vertical shaft will not accept a horizontal-mount replacement.
Understand PSI and GPM Tolerances
Pump parts and accessories should meet or exceed the ratings of the OEM component they replace, but oversizing by a wide margin introduces risk. A 4000-PSI-rated nozzle on a pump producing 2800 PSI is fine; the reverse is not. Flow rate matters equally: a hose or wand rated for a lower GPM than your pump produces creates a bottleneck that raises internal pressure beyond what seals expect.
Prioritize Sealed Connections and Crimp Integrity on Hoses
Owner complaints about replacement hoses overwhelmingly point to crimp failure or coupling separation under load rather than material degradation of the tube itself. A hose is only as good as the weakest connection point, so look for units where the coupling is bonded or swaged rather than simply threaded and clamped. The Made-in-USA construction referenced in some products is a signal of tighter QC at that step.
Our Verdict
Our top pick is the B & S Craftsman & Generac Replacement Hose at $28.99. It addresses the most common failure point across the Craftsman line, carries the widest confirmed compatibility, and domestic manufacturing gives the best evidence of consistent crimp quality from owner feedback. The budget pick is the Outlet Tube Replacement at $14.69, a small internal part that restores function cheaply when a pump’s discharge port cracks. If your unit is electric rather than gas and the symptom is a split external hose, the YAMATIC 25-foot option at $22.99 wins on length and cost, provided your fittings are M22-compatible.
FAQ
Can I replace a Craftsman pump head myself?
Yes, a pump head assembly is one of the more accessible repairs on a gas pressure washer. You need a socket set to remove the manifold bolts and a flat-head screwdriver to seat the new valve assembly, and most owners complete the job in under 30 minutes with no special tools.
How do I know which Craftsman model number I have?
Look for a rating plate on the frame near the engine or pump housing; it lists a model number in the format 580.XXXXXX. If the plate is faded or missing, the pump’s part numbers (stamped on the housing itself) and the engine’s spec number can identify the series.
Are third-party nozzle tips safe to use on Craftsman pumps?
They are safe as long as the pressure and flow ratings equal or exceed the pump’s output and the connection type matches. A 4000-PSI tip on a 2800-PSI pump has adequate margin; a 2500-PSI tip does not and could burst at the coupling.
Why does my Craftsman lose pressure after a few minutes of use?
The most frequent cause is a clogged inlet filter or a worn unloader valve, both of which restrict flow once the pump heats. Cracking an outlet tube produces a similar symptom on cold units. Checking the inlet screen first is the cheapest diagnostic step before ordering parts.