Author: admin

A practical guide to picking the best sander for cabinets and using it in the right order, with grits, settings and the mistakes that show up under paint.

Which sander to use on furniture, and the grit-by-grit procedure that keeps swirl marks and burn-through from showing up after the stain goes on.

A step-by-step method for stripping paint with a random orbital sander, including the exact grit sequence, speed settings and mistakes that ruin the surface.

A step-by-step diagnostic for an orbital sander that spits dust everywhere, from misaligned pad holes to clogged filters and static-choked hoses.

A step-by-step fix for a router bit slipping in the collet: clean and inspect the collet, seat at least 3/4 inch of shank, torque the nut correctly, and lighten your passes.

A step-by-step method for diagnosing and correcting a miter saw that will not cut square, using the five-cut test, a good square and feeler gauges.

A step-by-step method for cutting oak, maple and walnut with a jigsaw: blade TPI, speed dial, orbital setting, support and the mistakes that cause burning and bevel drift.

A step-by-step method for cutting plywood with a jigsaw: blade choice, orbit setting, scored and taped lines, full support underneath, and how to trim the edge to your finished line.

A step-by-step guide to setting up and using a miter saw for cutting crown molding, including exact angle settings, coping, and common mistakes.

A step-by-step guide to dialing in a miter saw for trim work, from squaring the blade to coping inside corners and hiding gaps on crooked walls.