Category: How-To

A step-by-step guide to choosing and using a router for rounding wood edges, with real bit sizes, depth settings and the mistakes that ruin a profile.

A step-by-step tutorial on using a router for cutting dadoes, including bit selection, jig setup, pass depth, and how to handle undersized plywood.

How to set up planer dust collection in a small shop, from port and hose sizing to CFM targets, filter choice, and the cutting settings that keep the line clear.

A step-by-step method for milling barn siding and salvage lumber safely, plus what actually matters when choosing a planer for reclaimed wood.

A practical guide to picking the best sander for cabinets and using it in the right order, with grits, settings and the mistakes that show up under paint.

Which sander to use on furniture, and the grit-by-grit procedure that keeps swirl marks and burn-through from showing up after the stain goes on.

A step-by-step method for stripping paint with a random orbital sander, including the exact grit sequence, speed settings and mistakes that ruin the surface.

A step-by-step diagnostic for an orbital sander that spits dust everywhere, from misaligned pad holes to clogged filters and static-choked hoses.

A step-by-step fix for a router bit slipping in the collet: clean and inspect the collet, seat at least 3/4 inch of shank, torque the nut correctly, and lighten your passes.

A step-by-step method for diagnosing and correcting a miter saw that will not cut square, using the five-cut test, a good square and feeler gauges.